Discover how Chemycal PRO helps you boosting your regulatory monitoring:
The standard regulates on Heavy duty gear oils for automobile (GL-5) which is blend of base stock made by refined mineral oil, synthetic base stock or their mixture and various additives. The standard specifies related test methods, inspection rules, marking, packaging, transportation and storage requirements. The standard is mainly applicable to automotive axles, particularly the hypoid gears operated under the condition of high-speed/shock-load, high-speed/ low-torque and low-speed/high-torque.
Draft Text 1 is available for download in the following languages: Chinese
A draft European Union law limits traces of a flame retardant in products to such a low level that it would effectively kill e-plastics recycling on the continent, two industry groups said.The brominated flame retardant in question is called decabromodiphenyl ether (decaBDE). It has been used in plastics contained in electronics, appliances and veh...
Revision of the mandatory standard SI 2302 Part 2 dealing with the transportation of dangerous substances and mixtures. The major changes included in this draft standard revision are as follows: - Removes from the standard's scope gas cylinders, that are covered by other mandatory standards; - Uses the risk group symbols according to the UN documen...
The purpose of the notified draft Conformity Assessment Procedure is to verify compliance with Mexican Official Standard NOM-199-SCFI-2017 or any standard replacing it, and to establish the guidelines to be followed in order to comply with Mexican Official Standard NOM-199-SCFI-2017.Draft Text 1 is available for download in the following ...
ABSTRACT - A common terminology is essential in any field of science and technology for a mutual understanding among different communities of experts and regulators, harmonisation of policy actions, standardisation of quality procedures and experimental testing, and the communication to the general public. It also allows effective revision of infor...
This Part of the Draft Uganda Standard describes a method of test for the determination of the copper content of sodium hydroxide for industrial use. The method is applicable to products having copper contents, expressed as Cu, in the ranges 0.5 mg/kg to 10 mg/kg and 0.25 mg/kg to 5 mg/kg for the solid and liquid products, respe...
2013 © MyChemicalMonitoring. ALL Rights Reserved. About Us | Terms and Conditions